Pregled bibliografske jedinice broj: 594044
Estimation of loudspeaker drivers parameters
Estimation of loudspeaker drivers parameters // Proceedings of 5th Congress of the Alps Adria Acoustics Association / Bucak, Tino ; Jambrošić, Kristian (ur.).
Zagreb: Hrvatsko akustičko društvo (HAD), 2012. str. - (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 594044 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Estimation of loudspeaker drivers parameters
Autori
Mateljan, Ivo ; Sikora, Marjan
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of 5th Congress of the Alps Adria Acoustics Association
/ Bucak, Tino ; Jambrošić, Kristian - Zagreb : Hrvatsko akustičko društvo (HAD), 2012
ISBN
978-953-95097-1-0
Skup
5th Congress of the Alps Adria Acoustics Association
Mjesto i datum
Petrčane, Hrvatska, 12.09.2012. - 14.09.2012
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Loudspeaker driver parameters; voice coil inductance estimation; least square error minimization
Sažetak
Thiele and Small have established an analogous circuit for loudspeaker driver analysis on low frequencies. Most measuring systems extend that model with circuits, serially added to voice coil resistance, that simulate lossy voice coil inductor at higher frequencies. This paper discusses three types of models for lossy inductor: L2R, L3R and L2RK (Thorborg) model that uses semi-inductance element. The physical explanation of these models is given by using transformer that couples voice coil and magnet pole piece. Next, the paper shows use of linear and nonlinear least square error (LSE) minimization method for the estimation of lossy inductance and Thiele-Small parameters. In order to achieve the robust estimation, a semi-analytic solution for setting initial parameters and iterative implementation of LSE method is defined. Experimental work shows that L3R and L2RK models give better results than standard L2R model. L2RK model is most accurate, but for use in simulations with standard circuit elements the L3R model is preferable.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
POVEZANOST RADA
Ustanove:
Fakultet elektrotehnike, strojarstva i brodogradnje, Split