Pregled bibliografske jedinice broj: 585880
Microstructure and mechanical properties of C–Si–Mn steels after simulated thermomechanical processing
Microstructure and mechanical properties of C–Si–Mn steels after simulated thermomechanical processing // Summaries of lectures of the 10th international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3 / Mamuzić, Ilija (ur.).
Zagreb: Hrvatsko metalurško društvo, 2012. str. 394-394 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 585880 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Microstructure and mechanical properties of C–Si–Mn steels after simulated thermomechanical processing
Autori
Mayevsky, G. V. ; Živković, V.
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Summaries of lectures of the 10<sup>th</sup> international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy, published in Metalurgija 51 (2012) 3
/ Mamuzić, Ilija - Zagreb : Hrvatsko metalurško društvo, 2012, 394-394
Skup
10<sup>th</sup> international simposium of Croatian Metallurgical Society SHMD '2012 : Materials and Metallurgy
Mjesto i datum
Šibenik, Hrvatska, 17.06.2012. - 21.06.2012
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
mechanical properties; C–Si–Mn steels
Sažetak
Continuous and discontinuous cooling tests were performed using a quench deformation dilatometer to develop a comprehensive understanding of the structural and kinetic aspects of the bainite transformation in low carbon transformation induced plasticity steels as a function of thermomechanical processing and composition. The optimum mechanical properties were obtained after isothermal holding at 450°C in the niobium steel containing the maximum volume fraction of retained austenite with acicular ferrite as the predominant second phase.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija
POVEZANOST RADA
Projekti:
120-1201787-1491 - Oblikovanje deformiranjem i svojstva novih metalnih materijala (Mamuzić, Ilija, MZOS ) ( CroRIS)
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb
Profili:
Vjekoslav Živković
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus
