Naslov
Mechanical Properties and Creep Resistence in PS/HDPE Blends with SEBS Block as Compatibilizer

Autori
Rek, Vesna ; Vranješ, Nina ; Jelčić, Želimir ; Mlinac-Mišak, Marica

Izvornik
E-Polymers (1618-7229) 1 (2006); 1-3

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
polystyrene; high density polyethylene; poly(styrene-b(ethylene-co-butylene)-b-styrene); PS/HDPE/SEBS blends; creep values; mechanical properties; DMA; SEM

Sažetak
Polystyrene(PS) and polyethylene (PE) blends are used in engineering fields, in constructions, because they have better properties than neat homopolymers. The application of PS and PE polymers is very wide. From this reason the PS/PE blends are very important for plastic wastes recycling from the economical and ecological aspects. The problem of their incompatibility maybe improves with compatibilizers. In this paper the influence of PS/HDPE blends compositions with SEBS as compatibilizer, on the morphological structure, rheological and mechanical properties is investigated. The rheological properties are measured with DMA analysis. The relaxation spectra are obtained. Creep relaxations and creep modulus are measured in the creep fatique regime and masters curves are created. Tensil strength, elongation at break and impact strength are determined. On the base of the results obtained and their correlation with SEM microphotographs of investigated systems the correlation between the blend composition, mechanical properties and creep resistance is established and discussed.

Izvorni jezik
Engleski

Znanstvena područja
Kemijsko inženjerstvo

POVEZANOST RADA