Naslov
Effect of the heating rate in the tempering of EN 100 V1

Autori
Cajner, Franjo ; Landek, Darko ; Rafael, Hrvoje ; Kovačić, Saša

Izvornik
Journal of heat treatment and materials (1867-2493) 67 (2012), 2; 118-124

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Carbon tool steel; tempering; tempering parameter; differential dilatation

Sažetak
In this paper, the effect of the heating rate on the process of tempering and the obtained hardness of the EN 100 V1 carbon tool steel has been investigated and determined. Steel specimens in two initial states were investigated: after quenching and after quenching and deep-cryogenic cooling. The specimens were submitted to tempering in a dilatometer, varying the heating rates, temperature of tempering between 200 °C and 690 °C and duration of keeping the specimens at that temperature. A common effect of these factors on the temperature of the start of particular stages in tempering and the obtained properties was determined using dilatometry. Differential dilatation analysis was carried out, together with hardness tests and XRD (X-ray diffraction) analysis.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

Napomena
Rad je kao predavanje prezentiran na skupu The 3rd International IFHTSE Conference on Heat Treatment and Surface Engineering of Tools and Dies, održanom, 25-23. 03. 2011, Wels, Austria ; uz međunarodnu recenziju objavljen je u Zborniku, CD, 8 str

POVEZANOST RADA