Pregled bibliografske jedinice broj: 5830
An Elactic-Plastic Stress and Strain Analisys of V-Bend Process by Finite Element Method
An Elactic-Plastic Stress and Strain Analisys of V-Bend Process by Finite Element Method // NAFEMS World Congress "97 Design, Simulation & Optimisation / Neautorizirano (ur.).
Stuttgart, Njemačka: NAFEMS, 1997. str. 371-382 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 5830 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
An Elactic-Plastic Stress and Strain Analisys of V-Bend Process by Finite Element Method
Autori
Math, Miljenko ; Jerbić, Bojan
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
NAFEMS World Congress "97 Design, Simulation & Optimisation
/ Neautorizirano - : NAFEMS, 1997, 371-382
Skup
NAFEMS World Congress "97
Mjesto i datum
Stuttgart, Njemačka, 09.04.1997. - 11.04.1997
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
elastic-plastic stress; spring back; FEM; robotic assembly
Sažetak
In order to determine the inevitable springback of a bended connector an elastic-plastic incremental finite element analysis has been carried out in this work. The simulation of sheet metal bending process has been designed as a plane strain problem. The accuracy of the simulation results, springback angle and the residual stress distribution after unloading are discussed through the comparison with experimental results.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
