Pregled bibliografske jedinice broj: 5829
Finite element analysis of the stress-strain condition and computer aided modeling of bending tools for robotic assembly
Finite element analysis of the stress-strain condition and computer aided modeling of bending tools for robotic assembly // Computational Plasticity Fundamentals and Applications / D.R.J. Owen, E. Onate, E. Hinton (ur.)., 1997. str. 1916-1921
CROSBI ID: 5829 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Finite element analysis of the stress-strain condition and computer aided modeling of bending tools for robotic assembly
Autori
Jerbić, Bojan ; Math, Miljenko ; Mahović, Sanjin
Vrsta, podvrsta i kategorija rada
Poglavlja u knjigama, znanstveni
Knjiga
Computational Plasticity Fundamentals and Applications
Urednik/ci
D.R.J. Owen, E. Onate, E. Hinton
Izdavač
International Center for Numerical Methods in Engineering (CIMNE)
Godina
1997
Raspon stranica
1916-1921
ISBN
84 87867 71 5
Ključne riječi
robotic assembly, finite elmente analysis, plasticity
Sažetak
The control of mechanical spring-back appears as a very important problem in the designing of bending
tools for electronic components which are intended
to be assembled by robot. This is because robotic
assembly requires very tight shape tolerances to
prevent process break-downs. In order to determine
the inevitable spring-back of a bent connector the
elastic-plastic incremental finite element
analysis has been carried out including friction
effects and material characteristics such as work
hardening. The accuracy of the simulation results,
spring-back angle and the residual stress
distribution after unloading are discussed
comparing them to the experimental results.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
