Pregled bibliografske jedinice broj: 58196
A Temperature-Dependent Electrothermal MOSFET Model for Calculating it's Current Loadability
A Temperature-Dependent Electrothermal MOSFET Model for Calculating it's Current Loadability // Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE'99) / Jezernik, K. (ur.).
Piscataway (NJ): Institute of Electrical and Electronics Engineers (IEEE), 1999. str. 579-593 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 58196 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
A Temperature-Dependent Electrothermal MOSFET Model for Calculating it's Current Loadability
Autori
Šunde, Viktor ; Benčić, Zvonko ; Jakopović, Željko
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the IEEE International Symposium on Industrial Electronics (ISIE'99)
/ Jezernik, K. - Piscataway (NJ) : Institute of Electrical and Electronics Engineers (IEEE), 1999, 579-593
ISBN
0-7803-5662-4
Skup
IEEE International Symposium on Industrial Electronics
Mjesto i datum
Bled, Slovenija, 12.07.1999. - 16.07.1999
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
electrothermal model; power MOSFET; virtual junction temperature; temperature dependent perameters
Sažetak
A developed temperature-dependent electrothermal model consists of a temperature dependent MOSFET model and a temperature independent model of the MOSFET thermal system. The temperature dependent MOSFET parameters are the channel charge carriers mobility, drift area resistance and threshold voltage. Calculated at each moment are voltage, current, losses (including conduction losses, built-in diode losses and switching losses) and the virtual junction temperature. During simulation, the MOSFET temperature dependent parameters depend on instataneous virtual junction temperature. The electrothermal model is based on catalogue data about MOSFET. It gives the designer highly precise information necessary for electrical and thermal design of electronic circuits, especially of power electronic converters in transient and stationary states. The temperature dependent electrothermal model was developed using an IsSpice4 software. The existing model of the signal MOSFET was expanded with the temperature dependence of paremeters and supplemented with an electrical model of is's thermal system. Firstly, the model was checked by simulating catalogue characteristics and next by comparing a simulated time course for losses and for virtual junction temperature with a measured time course of losses and virtual junction temperature of the MOSFET in one chopper. Measuring the time course of virtual junction temperature required designing a special measurement equipment.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
