Pregled bibliografske jedinice broj: 580866
Granični uvjeti primjene korozijski otpornih čelika kao armatura u betonu
Granični uvjeti primjene korozijski otpornih čelika kao armatura u betonu // Savremena građevinska praksa / Folić, Radomir ; Radonjanin, Vlastimir (ur.).
Novi Sad: Fakultet tehničkih nauka Univerziteta u Novom Sadu, 2012. str. 117-134 (pozvano predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 580866 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Granični uvjeti primjene korozijski otpornih čelika kao armatura u betonu
(Limit conditions for the application of corrosion resistant steel as reinforcement)
Autori
Serdar, Marijana
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Savremena građevinska praksa
/ Folić, Radomir ; Radonjanin, Vlastimir - Novi Sad : Fakultet tehničkih nauka Univerziteta u Novom Sadu, 2012, 117-134
ISBN
978-86-7892-376-0
Skup
Savremena građevinska praksa
Mjesto i datum
Andrevlje, Srbija, 17.05.2012. - 18.05.2012
Vrsta sudjelovanja
Pozvano predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
corrosion resistant steel; passive film; critical chloride content; pH value; environmental classes
Sažetak
One of the methods, used to prolong the time to or avoid corrosion initiation, is the utilisation of certain types of corrosion resistant reinforcement, which have higher resistance to corrosion than black steel reinforcement, and are less expensive than classical stainless steels, which makes their application as reinforcement economically justified. In order to enable the optimal choice of steel for a certain environment, there is a need to correlate corrosion behaviour of different types of steel with the environmental loads. There is also a strong need for quantification of corrosion behaviour of these steels, usually defined through electrochemical parameters, e.g. current or corrosion resistance, through parameters that can be used further in civil engineering practice, e.g. corrosion depth in mm. In this paper a part of the research project investigating the corrosion behaviour of different type of corrosion resistant reinforcement is presented. In the part presented here, different types of reinforcing steels were exposed to alkaline solutions, simulating concrete pore solution, to evaluate their corrosion resistance, On the basis of these results, the critical chloride concentration and pH value of pore solution for initiation of corrosion were determined. Furthermore, different types of corrosion resistant steel are recommended as optimal for different classes of environment.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo, Temeljne tehničke znanosti
POVEZANOST RADA
Projekti:
082-0822161-2159 - RAZVOJ NOVIH MATERIJALA I SUSTAVA ZAŠTITE BETONSKIH KONSTRUKCIJA
Ustanove:
Građevinski fakultet, Zagreb
Profili:
Marijana Serdar
(autor)