Pregled bibliografske jedinice broj: 57927
Mathematical Modelling And Minimization Of Deep Drawing Force With Thickness Reduction
Mathematical Modelling And Minimization Of Deep Drawing Force With Thickness Reduction // ICTP 1999-Advanced Technology Of Plasticity / Geiger, Manfred (ur.).
Nürnberg: Springer, 1999. str. 2143-2148 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 57927 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Mathematical Modelling And Minimization Of Deep Drawing Force With Thickness Reduction
Autori
Jurković, Zoran ; Jurković, Milan
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
ICTP 1999-Advanced Technology Of Plasticity
/ Geiger, Manfred - Nürnberg : Springer, 1999, 2143-2148
Skup
ICTP 1999-Advanced Technology Of Plasticity
Mjesto i datum
Nürnberg, Njemačka, 19.09.1999. - 24.09.1999
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Mathematical Modelling; Deep Drawing; Thickness Reduction; Drawing Force Minimization
Sažetak
The mathematical modelling of deep drawing force with wall thickness reduction is performed by applying the upper bound method. Basic parameters of modelling are: deformation degree, tool working zone geometry, plastic flow angle and contact friction. The purpose of drawing force modelling is minimization of tool loading with the aim of increasing tool life and productivity of the machining system. By applaying minimization of deep drawing force tool life may be increased by more than 40%, which is the main aim of this paper.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
