Naslov
Measurement Systems for Electrical Machine Monitoring

Autori
Vražić, Mario ; Gašparac, Ivan ; Kovačić, Marinko

Vrsta, podvrsta i kategorija rada
Poglavlja u knjigama, znanstveni

Knjiga
Applied Measurement Systems

Urednik/ci
Haq, Zahurul

Izdavač
IntechOpen

Grad
Rijeka

Godina
2012

Raspon stranica
45-62

ISBN
978-953-51-0103-1

Ključne riječi
Measurement Systems, Electrical Machine Monitoring

Sažetak
Monitoring systems on electrical machines, nowadays largely present on new electrical rotating (synchronous generators) and non rotating machines (transformers) have to endure harsh conditions such as vibrations and electromagnetic disturbances. Also, especially for rotating machines, rotor physical quantities (temperature, strain, current…), have to be transferred to the standstill part of the measurement system without galvanic contact. Therefore, monitoring systems should be, and usually are, designed for a specific purpose and for a specific machine. Some essential parts are the same but most of the monitoring system should be custom made especially if one takes into consideration that there is a small serial production of large electrical machines in the world and that most of the large units are unique. Modern monitoring of big transformers covers permanent on-line monitoring of electrical, magnetic and mechanic quantities. It is specific when compared to rotational electrical machines because it also usually includes monitoring of dissolved gasses in transformer oil. This information, with proper interpretation, represents an important element for transformer state determination. However, transformer monitoring systems are not the focus of this chapter. This chapter deals with all problems, obstacles and solutions applied to two measurement systems installed on a 35 MVA hydro-generator and a 250 MVA turbo-generator. Large electric machines justify investment in measurement systems for several reasons. Usually, measurement systems for bearings are installed. In such systems vibrations and oil parameters (pressure and temperature) are monitored to help maintenance. Measurements of stator and less often rotor currents are also present as parts of different systems. For example, a differential stator current measurement is present for protection purposes and enables detection of current leakage (short circuit between phase windings). Monitoring systems that incorporate all necessary measurements and, of course, interpretations of those measurements are almost non existing and very rare. This chapter will concentrate on synchronous generators.

Izvorni jezik
Engleski

Znanstvena područja
Elektrotehnika

POVEZANOST RADA