Pregled bibliografske jedinice broj: 570801
Water-in fuel emulsion as primary method to reduce NOx from diesel engine exhaust gas
Water-in fuel emulsion as primary method to reduce NOx from diesel engine exhaust gas // Trends in the Development of Machinery and Associated Technology / Ekinović, Sabahudin ; Vivancos, J.Calvet ; Yalcin, Senay (ur.).
Zenica, 2009. str. 457-460 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 570801 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Water-in fuel emulsion as primary method to reduce NOx from diesel engine exhaust gas
Autori
Lalić, Branko ; Komar, Ivan ; Kulenović, Zlatan ; Antonić, Radovan
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Trends in the Development of Machinery and Associated Technology
/ Ekinović, Sabahudin ; Vivancos, J.Calvet ; Yalcin, Senay - Zenica, 2009, 457-460
Skup
13th International Research/Expert Conference- TMT2009
Mjesto i datum
Hammamet, Tunis, 16.10.2009. - 21.10.2009
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
marine diesel engine; exhaust emissions; NOx; Oil-in-Water emulsification
Sažetak
The exhaust emissions from large marine diesel engines on ocean going vessels contains among other pollutants a significant amount of Nitrogen Oxides (NOx) wich are the main by product of combustion and they contribute to acid rain as well as the formation of harmful ground-level ozone and photochemical smog. The manufacturers of the marine vessel engines and the shipbuilders have responded to the demands to reduce vessel emissions by improving the operation of the engines and by incorporating emissions control technologies in the design of new vessels. NOx formation is suppressed by water present in the combustion chamber. Water can be introduced in various ways, for example by humidification of the combustion air or by injecting water or steam directly into the combustion chamber, or as water-in-fuel emulsion. If water is evaporated inside the combustion chamber the adiabatic combustion temperature (heat load) is reduced as a result of the higher molar heat capacity of water compared to air. The lower temperature and the better fuel distribution are leading to a lower formation of NOx. This paper describes method to reduce nitrogen oxides from exhaust gas of the slow speed marine diesel propulsion engine B&W-5L90MC using Oil-in-Water emulsificationon and VIT (variable injection timing) adjustment after emulsifier shuting off. The efficiency of the Water - in - Fuel emulsification system was tested on engine room full mission simulator Kongsberg ERS-L11 MAN B&W-5L90MC–VLCC Version MC90-IV which is installed on Faculty of Maritime studies in Split. The results are illustrated by figures and graphs which shows approximately 20% NOx reduction in exhaust gas
Izvorni jezik
Engleski
Znanstvena područja
Tehnologija prometa i transport
POVEZANOST RADA
Projekti:
250-2502209-2364 - Nove tehnologije u dijagnostici i upravljanja brodskih porivnih sustava (Komar, Ivan, MZOS ) ( CroRIS)
Ustanove:
Pomorski fakultet, Split
Profili:
Zlatan Kulenović
(autor)
Ivan Komar
(autor)
Mario Radovan
(autor)
Branko Lalić
(autor)
Radovan Antonić
(autor)