Pregled bibliografske jedinice broj: 569073
Surface density of growth defects in different PVD hard coatings prepared by sputtering
Surface density of growth defects in different PVD hard coatings prepared by sputtering // Vacuum, 86 (2012), 6; 794-798 doi:10.1016/j.vacuum.2011.07.013 (međunarodna recenzija, članak, znanstveni)
CROSBI ID: 569073 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Surface density of growth defects in different PVD hard coatings prepared by sputtering
Autori
Panjan, Peter ; Čekada, M. ; Panjan, M. ; Kek-Merl, D. ; Zupanič, F. ; Ćurković, Lidija ; Paskvale, S.
Izvornik
Vacuum (0042-207X) 86
(2012), 6;
794-798
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
Defects; PVD coatings
Sažetak
Growth defects are present in all PVD hard coatings. They have detrimental influence on their tribological properties (higher sticking of workpiece material, higher friction coefficient, worse corrosion resistance, higher gas permeation). In order to improve the tribological properties of PVD hard coatings it is important to minimize the concentration of growth defects. Conventional TiAlN single layer as well as AlTiN/TiN and TiAlN/CrN nanolayer coatings were deposited on cemented carbide, powder metallurgical high speed steel (ASP30) and cold work tool steel (D2) by magnetron sputtering in the CC800/7 and CC800/9 sinOx ML (CemeCon) deposition systems, respectively. The surface morphology of the coated substrates was examined by scanning electron microscope (FE-SEM) in combination with focused ion beam (FIB), and 3D stylus profilometer. By means of 3D-profilometry we performed several measurements and detailed analysis on a series of samples from the several hundred production batches. The influence of growth defects on GDOES (glow-discharge optical emission spectrometry) depth resolution and pitting corrosion was also studied.
Izvorni jezik
Engleski
Znanstvena područja
Kemijsko inženjerstvo, Strojarstvo
Napomena
Rad je prezentiran na skupu 13th Joint Vacuum Conference, održanom od 20.-24.06.2010., Štrbské Pleso, Slovačka, kojeg je organiziralo Slovak Vacuum Society u suradnji s Vacuum Societies of Austria, Croatia, Czech Republic, Hungary and Slovenia.
POVEZANOST RADA
Projekti:
120-1201833-1789 - Istraživanje strukture i svojstava tehničke keramike i keramičkih prevlaka (Ćurković, Lidija, MZOS ) ( CroRIS)
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb,
Fakultet kemijskog inženjerstva i tehnologije, Zagreb
Profili:
Lidija Ćurković
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Current Contents Connect (CCC)
- Web of Science Core Collection (WoSCC)
- Science Citation Index Expanded (SCI-EXP)
- SCI-EXP, SSCI i/ili A&HCI
- Scopus