Pretražite po imenu i prezimenu autora, mentora, urednika, prevoditelja

Napredna pretraga

Pregled bibliografske jedinice broj: 557270

Extrusion of Hydrated Bentonite through the Woven Geotextile of GCL and the Influence on GCL/GM Interface Shear Strength


Vukelić, Ana, Szavits-Nossan, Antun, Kvasnička, Predrag
Extrusion of Hydrated Bentonite through the Woven Geotextile of GCL and the Influence on GCL/GM Interface Shear Strength // 3rd International Symposium on Geosynthetic Clay Liners
Würzburg, 2010. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)


CROSBI ID: 557270 Za ispravke kontaktirajte CROSBI podršku putem web obrasca

Naslov
Extrusion of Hydrated Bentonite through the Woven Geotextile of GCL and the Influence on GCL/GM Interface Shear Strength

Autori
Vukelić, Ana, Szavits-Nossan, Antun, Kvasnička, Predrag

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
3rd International Symposium on Geosynthetic Clay Liners / - Würzburg, 2010

Skup
3rd International Symposium on Geosynthetic Clay Liners.

Mjesto i datum
Würzburg, Njemačka, 15.09.2010. - 16.09.2010

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
extrusion; bentonite; GCL

Sažetak
Testing program to determine the interface shear strength between needle-punched geosynthetic clay liner (GCL) and a textured geomembrane is presented. Half of the tests were done on prehydrated GCL samples. Bentonite was observed to extrude through the woven geotextile of the GCL’s onto the geomembrane for specimens prehydrated at low normal stresses, consolidated and afterwards sheared at higher normal stresses. The parameter cextrusion was defined as a unit of measurement for the quantity of bentonite extruded onto the contact area. Greater bentonite extrusion gave the lower value of interface shear strength, i.e. interface secant friction angle. The interface shear strength also decreases with an increase in normal shear stress for both prehydrated and non- prehydrated samples. Guidelines for calculating the decrease of interface secant friction angle due to the increase of normal stress and bentonite extrusion is established.

Izvorni jezik
Engleski

Znanstvena područja
Građevinarstvo



POVEZANOST RADA


Projekti:
195-0831529-1847 - Ispitivanje trajnosti mineralnih brtvenih barijera (Kovačević Zelić, Biljana, MZOS ) ( CroRIS)
195-1951825-1507 - Razvoj sustava upravljanja geotehničkim podacima za procjenu prirodnih hazarda (Kvasnička, Predrag, MZOS ) ( CroRIS)

Ustanove:
Rudarsko-geološko-naftni fakultet, Zagreb


Citiraj ovu publikaciju:

Vukelić, Ana, Szavits-Nossan, Antun, Kvasnička, Predrag
Extrusion of Hydrated Bentonite through the Woven Geotextile of GCL and the Influence on GCL/GM Interface Shear Strength // 3rd International Symposium on Geosynthetic Clay Liners
Würzburg, 2010. (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
Vukelić, Ana, Szavits-Nossan, Antun, Kvasnička, Predrag (2010) Extrusion of Hydrated Bentonite through the Woven Geotextile of GCL and the Influence on GCL/GM Interface Shear Strength. U: 3rd International Symposium on Geosynthetic Clay Liners.
@article{article, year = {2010}, keywords = {extrusion, bentonite, GCL}, title = {Extrusion of Hydrated Bentonite through the Woven Geotextile of GCL and the Influence on GCL/GM Interface Shear Strength}, keyword = {extrusion, bentonite, GCL}, publisherplace = {W\"{u}rzburg, Njema\v{c}ka} }
@article{article, year = {2010}, keywords = {extrusion, bentonite, GCL}, title = {Extrusion of Hydrated Bentonite through the Woven Geotextile of GCL and the Influence on GCL/GM Interface Shear Strength}, keyword = {extrusion, bentonite, GCL}, publisherplace = {W\"{u}rzburg, Njema\v{c}ka} }




Contrast
Increase Font
Decrease Font
Dyslexic Font