Naslov
Possibilities to Measure Contact Friction in Bulk Metal Forming

Autori
Plančak, Miroslav ; Car, Zlatan ; Kršulja, Marko ; Vilotić, Dragiša ; Kačmarcik, Igor ; Movrin, Dejan

Izvornik
Tehnicki Vjesnik-Technical Gazette (1330-3651) 19 (2012), 4; 727-734

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Cold backward extrusion; Experimental tooling; Friction models

Sažetak
Friction occurs in all metal forming operations and, in general, it has a negative impact on process parameters, die life, as well as workpiece quality. In cold metal forming processes high interface pressures between die and material take place. These pressures can be the limiting factor of application of cold forming. By reducing interfacial friction, contact pressures can be reduced too. Knowledge of friction amount (factor of friction μ and/or friction ratio m) is essential for calculation of the main process parameters (load, energy), for choosing a proper lubricant but also for numerical modelling of forming operations. There exist a number of experimental methods to determine friction in metal forming processes. Current paper deals with the possibilities to evaluate friction. It analyses and assesses a number of existing friction models in cold metal operations. Proposal of a new friction model for cold metal forming operations is presented and discussed. Measurement of friction force in backward extrusion for different lubrication conditions was also preformed.

Izvorni jezik
Engleski

Znanstvena područja
Metalurgija, Računarstvo, Strojarstvo

POVEZANOST RADA