Pregled bibliografske jedinice broj: 545277
Influence of Hydrogel "Density" on the Synthesis of Zeolite A
Influence of Hydrogel "Density" on the Synthesis of Zeolite A // Book of Abstracts of the 5th International FEZA Conference
Valencia: FEZA, 2011. str. 154-154 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 545277 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Influence of Hydrogel "Density" on the Synthesis of Zeolite A
Autori
Bronić, Josip ; Palčić, Ana ; Subotić, Boris
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Book of Abstracts of the 5th International FEZA Conference
/ - Valencia : FEZA, 2011, 154-154
Skup
5th International FEZA Conference
Mjesto i datum
Valencia, Španjolska, 03.07.2011. - 07.07.2011
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Zeolite A; Synthesis; Hydrogel density
Sažetak
Many parameters can affect crystallization kinetics and particulate properties of the synthesis and product(s). The "density" of the starting mixture (gel dispersed in alkaline solution) is one of them. Keeping constant Na2O/H2O and Al2O3/SiO2 ratios and decreasing SiO2/H2O ratio, one can obtain a series of hydrogels of different "density by mixing of appropriate aluminate and silicate solutions. During crystallization at 80 oC, samples were take out the oven, washed, driedand analyzed using AAS, XRD, LLS, optical and electron microscopy. Results of particle size distribution curves by volume of end products show bimodal distribution in all cases. The size of the largest particles and LV50 value show that high density of the starting hydrogel (H1, H2) gives larger crystals at lower growth rate, while the smaller crystals come from diluted systems (H4, H5) at higher growth rate. But, most of the changes in particulate properties are observed in the population of larger particles by volume. Due to the large number of small particles in all systems, (similar shape and size of maximums around 1 micrometer) the LN50 (the size value under which 50 % of all particles lie) is constant within experimental error (0.773 micrometers, around 1.8 % of average value)
Izvorni jezik
Engleski
Znanstvena područja
Kemija
POVEZANOST RADA
Projekti:
098-0982904-2953 - Studij utjecaja svojstava alumosilikatnih prekursora na njihove transformacije (Bronić, Josip, MZOS ) ( CroRIS)
Ustanove:
Institut "Ruđer Bošković", Zagreb