Naslov
Cure modelling of polyester thermosets in a glass mould

Autori
Kosar, Vanja ; Šercer, Hrvoje ; Tomašić, Vesna

Izvornik
Chemical engineering research & design (0263-8762) 90 (2012), 4; 534-540

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
thermoset ; curing ; kinetic model ; inert filler ; glass mould ; heat transfer ; boundary conditions

Sažetak
The curing of unsaturated polyester was studied experimentally and using a model of the process. The kinetic parameters were calculated from the heat flow–time curves obtained by differential scanning calorimetry (Mettler Toledo DSC 823), operating in a non-isothermal mode. The temperature–time histories were studied in a cylindrical glass mould. A potential use of glass as a mould for polymer curing is found in the production of optical sensors. Here, glass was selected as a mould material because it is UV transparent, chemically inert and easy to clean. The thermal properties of glass moulds coupled with the intrinsic curing kinetics are of a significant interest in such investigations. Taking into account the heat transferred by the convection from the air to the mould surface and the conduction through the mould wall and resin, as well as the kinetics of the heat generated in the cure reaction, a numerical model has been constructed. The contributions to the rise in temperature from the heat conduction and chemical reaction are different in different parts of the composite, which can explain the temperature–time histories. The introduction of a carbonate based filler reduced the amount of heat released in the composite and, as a result, lowered the temperatures through the resin. A good agreement between experimental data and the predicted mathematical model of the curing process in the mould has been observed.

Izvorni jezik
Engleski

Znanstvena područja
Kemijsko inženjerstvo

POVEZANOST RADA