Naslov
Force and positon control of a hydraulic press

Autori
Šitum, Željko

Izvornik
VENTIL - revija za fluidno tehniko, avtomatizacijo in mehatroniko - Journal for Fluid Power, Automation and Mechatronics (1318-7279) 17 (2011), 4; 314-320

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
hydraulic press; force and position control; servo valve

Sažetak
The article reports on the design and control of a 50-kN hydraulic press that was made for educational purposes as well as for an experimental verification of control algorithms. The press contains a servo-solenoid pressure-control valve for regulating the pressure in the cylinder chamber and thus the force of the hydraulic press. The press is equipped with a pressure sensor installed in the cylinder chamber for indirectly measuring the pressing force. On the press it is also possible to measure the position of the upper plate by using a micro-pulse linear transducer, which creates a precondition for the realization of a hybrid force/position- control algorithm. The control algorithms and monitoring process are implemented on a real-time hardware board. They are pro- grammed in the Matlab/Simulink program using the Real-Time Workshop tool for generating the C code and building an executive program. The article also shows an industrial solution for hydraulic press control using a programmable logic controller (PLC) as a control device. Based on the experimental results, it can be concluded that electrically actuated control components supported by the appropriate computer programs make it possi- ble to improve the characteristics of the hydraulic systems required in modern industrial plants.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA