Naslov
The Application of GNSS VRS Service in Industrial Survey

Autori
Pavasović, Marko ; Rezo, Milan ; Bašić, Tomislav

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 5th International Conference on Engineering Surveying INGEO 2011 / Kopáčik, Alojz ; Kyrinovič, Peter ; Roić, Miodrag - Zagreb : Geodetski fakultet Sveučilišta u Zagrebu, 2011, 279-286

ISBN
978-953-6082-15-5

Skup
5th International Conference on Engineering Surveying INGEO 2011

Mjesto i datum
Brijuni, Croatia, 22.09.2011. - 24.09.2011

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
Post-processing; CROPOS; VRS; interpolation; extrapolation; hydro power plant; fundamental network

Sažetak
By establishment of CROatian POsitioning System (CROPOS), the network of CORS GNSS stations, the application of satellite survey methods has been enabled among wide geodetic population and almost in all geodetic branches. When speaking of GNSS data post-processing, two aspects are possible: survey data processing at locations (points) with unknown position (coordinates) and use of CORS (Continuously Operating Reference Station) data as reference points or VRS (Virtual Reference Station) generation (interpolation/extrapolation) of measured data (RINEX files) at locations (points) with known position coordinates and use of CORS data as reference points. In this work, on example of hydro power plant fundamental geodetic network, the comparison of coordinates determined by GNSS measurements at network points and coordinates determined by VRS generation (interpolation/extrapolation) from CROPOS will be given as long as recommendations of possibility of application of VRS generated data in CROPOS.

Izvorni jezik
Engleski

Znanstvena područja
Geodezija

POVEZANOST RADA