Pregled bibliografske jedinice broj: 526409
Design and Modelling of IC-Stripline Having Improved VSWR Performance
Design and Modelling of IC-Stripline Having Improved VSWR Performance // Proceedings of the 8th International Workshop on Electromagnetic Compatibility of Integrated Circuits 2011 / Gillon, Renaud ; Gielen, Georges ; Baric, Adrijan (ur.).
Dubrovnik: Institute of Electrical and Electronics Engineers (IEEE), 2011. str. 82-87 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 526409 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Design and Modelling of IC-Stripline Having Improved VSWR Performance
Autori
Mandić, Tvrtko ; Gillon, Renaud ; Nauwelaers, Bart ; Barić, Adrijan
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 8th International Workshop on Electromagnetic Compatibility of Integrated Circuits 2011
/ Gillon, Renaud ; Gielen, Georges ; Baric, Adrijan - Dubrovnik : Institute of Electrical and Electronics Engineers (IEEE), 2011, 82-87
ISBN
9-7895-3184-1580
Skup
8th International Workshop on Electromagnetic Compatibility of Integrated Circuits
Mjesto i datum
Dubrovnik, Hrvatska, 06.11.2011. - 09.11.2011
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
IC-Stripline; Lumped element model; 3D EM simulations
Sažetak
This paper presents design and modelling of the open version of IC-Stripline manufactured on the FR-4 substrate and connected by SMA connectors and MS lines. Three versions of the IC-Stripline are presented and improvement in VSWR performance is gradually obtained. The first version of the IC- Stripline has PCB ground plane on the bottom layer. Although this version has several advantages, it requires multilayer PCB in order to provide shielding for fixture lines used for DUT connection. Therefore, the second version of the IC-Stripline is designed which has PCB ground plane on the top layer. Although the significant improvement in VSWR performance is obtained, the second version of the IC-Stripline does not have VSWR lower than 1, 2 over the frequency range up to 3~GHz. The 3D~EM simulations are used to optimize the tapered sections of the IC-Stripline in order to improve VSWR performance. The geometrical parameters of the notch are optimized and obtained VSWR is less than 1, 2 over the frequency range up to 3~GHz. The optimized version of the IC- Stripline is measured and improvement in VSWR performance is confirmed. Furthermore, the circuit models for IC-Stripline and end-launch SMA connector are presented.
Izvorni jezik
Engleski
Znanstvena područja
Elektrotehnika
POVEZANOST RADA
Projekti:
036-0361621-1622 - Kvaliteta signala u integriranim sklopovima s mješovitim signalom (Barić, Adrijan, MZO ) ( CroRIS)
Ustanove:
Fakultet elektrotehnike i računarstva, Zagreb
