Pregled bibliografske jedinice broj: 50801
CAD Modelling of the Optimal Axial-radial Impeller of the Centrifugal Compressor for CAM
CAD Modelling of the Optimal Axial-radial Impeller of the Centrifugal Compressor for CAM // The 10th International DAAAM Symposium "Intelligent Manufacturing & Automation: Past-Present-Future" / Katalinic, B. (ur.).
Beč: Danube Adria Association for Automation & Manufacturing, 1999. str. 175-176 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 50801 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
CAD Modelling of the Optimal Axial-radial Impeller of the Centrifugal Compressor for CAM
Autori
Guzović, Zvonimir ; Matijavević, Branimir ; Novko, Igor
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Skup
The 10th International DAAAM Symposium "Intelligent Manufacturing & Automation: Past-Present-Future"
Mjesto i datum
Beč, Austrija, 21.10.1999. - 23.10.1999
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
centrifugal compressor; impeller; optimal geometry; automated design
Sažetak
The paper presents the problem of the optimal design of axial-radial impeller in a centrifugal compressor, simultaneously satisfying the demands of aerodynamics, strength and technology. In the literature, there are several engineering analytic-graphic methods for the design and checking of the geometry of the axial-radial impeller. By usin adequate CAD application software and numerical modelling, one of these is automated and the results of the design are given in the paper. The set algorithm is intended for CAM.
Izvorni jezik
Engleski
