Naslov
The Ship Hull Service Continous Monitoring System and Procedure

Autori
Belak, Stipe

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 3rd Conference for New Ship and Marine Technology New S-Tech 2002 / - Kobe, 2002

Skup
3rd Conference for New Ship and Marine Technology New S-Tech 2002

Mjesto i datum
Kobe, Japan, 2002

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
the ship hull; inclination angles measuring

Sažetak
The paper introduces the system and activity that enables the ship hull deformations and stresses monitoring and control in real service conditions. The hull overall deformations calculation is based on the inclination of the strong points of the hull structure. The inclination angles measuring is obtained using the electronic inclinometers forming the measuring network. Using the inclination angles measured data throughout the ship network the overall deformations are calculated. The considered deformations of the hull are bending in the longitudinal – vertical plane and torsion in the longitudinal sense.The hull bending deformation in the longitudinal – horisontal plane can be calculated if she is with no list. Based on the measured data the hull neutral line deformations are calculated. That is the basis for estimation of the hull structure elements deformations and stresses. The proposed monitoring system can be used in real service conditions as a basis for the navigation parameters selection. Navigation parameters that are to be changed when excessive deformations occour are speed of navigation, course – direction of navigation and the draught – ship cargo/ballast condition.

Izvorni jezik
Engleski

Znanstvena područja
Brodogradnja

POVEZANOST RADA