Naslov
Garments Prototype Development Using an Innovative Computer Technology

Autori
Petrak, Slavenka ; Glavica, Božica ; Geršak, Jelka ; Mahnić, Maja ; Rogale, Dubravko ; Ujević, Darko

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Book of Proceedings of the 5th International Textile, Clothing & Design Conference – Magic World of Textiles / Dragčević, Zvonko - Zagreb : Tekstilno-tehnološki fakultet Sveučilišta u Zagrebu, 2010, 488-493

Skup
International Textile, Clothing & Design Conference – Magic World of Textiles (5 ; 2010)

Mjesto i datum
Dubrovnik, Hrvatska, 03.10.2010. - 06.10.2010

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
computer-aided 2D/3D garment construction; 3D simulation; mechanical properties of fabrics

Sažetak
The paper describes the systematic implementation of sophisticated computer technologies through all segments of the prototype development of garment models according to individual body measurements. Thus, initial 3D female body scanning was performed using a laser 3D body scanner. On the basis of the found measurements a construction of the basic cut of women's skirt and blouse was made using CAD-system for the 2D/3D computer garment construction and simulation. By using the Kawabata Evaluation System (KES) mechanical properties of two different material types were tested in order to implement the results in the CAD system. By using program tools modeling of selected blouse and skirt models was performed. In line with the previously determined body measurements an adaptation of the parameter computer body model or avatar was made. By using material parameters on 2D cutting parts simulations of the 3D model of a garment were performed in order to test fit. Through interactive successive procedures of 3D simulation of garment models and modifications of 2D cutting parts cuts were adapted and additionally modeled in order to achieve optimum cut fit. By connecting the CAD/CAM systems cutting parts were cut using the unit for cutting prototypes, and in real conditions cut fit was tested on a model, and comparisons with a virtual model were made.In the final stage real prototypes were made for computer-simulated garment models in order to verify virtual simulated prototypes.

Izvorni jezik
Engleski

Znanstvena područja
Tekstilna tehnologija

POVEZANOST RADA