Pregled bibliografske jedinice broj: 486678
Fabric Distortion After Weaving - An Approximate Theoretical Model
Fabric Distortion After Weaving - An Approximate Theoretical Model // Book of Proceedings of the 5th International Textile, Clothing and Design Conference 2010 - Magic World of Textiles / Dragčević, Zvonko ; Hursa Šajatović, Anica ; Vujasinović, Edita (ur.).
Zagreb: Tekstilno-tehnološki fakultet Sveučilišta u Zagrebu, 2010. str. 729-734 (poster, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 486678 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Fabric Distortion After Weaving - An Approximate Theoretical Model
Autori
Šomođi, Željko ; Kovačević, Stana ; Dimitrovski, Krste
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Book of Proceedings of the 5th International Textile, Clothing and Design Conference 2010 - Magic World of Textiles
/ Dragčević, Zvonko ; Hursa Šajatović, Anica ; Vujasinović, Edita - Zagreb : Tekstilno-tehnološki fakultet Sveučilišta u Zagrebu, 2010, 729-734
Skup
5th International Textile, Clothing and Design Conference 2010 - Magic World of Textiles
Mjesto i datum
Dubrovnik, Hrvatska, 03.10.2010. - 06.10.2010
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
woven fabric; weft distortion; elastic homogenisation; orthotropic material
Sažetak
The weft distortion represents an angular deformation of some fabrics after weaving, i.e. change in the original right angle between warp and weft. Here this problem is addressed by means of an approximate theoretical model. The proposed model is related to the fact that in case of diagonal weaving pattern, the fabric is an orthotropic material with the principal axes of elasticity other than warp and weft directions. Due to non-zero normal-shear coefficients, the unloading of warp pre-tension results in angular deformation. The theoretical model is simplified in the sense that the fabric is regarded as an assembly of stripes made of two different isotropic linear elastic materials. Following the principles of elastic homogenisation, global principal elastic moduli are derived in terms of individual elastic constants. Components of compliance tensor in warp – weft directions, including normal-shear coefficients, are then derived from the rule of tensor transformation for rotated coordinate axes.
Izvorni jezik
Engleski
Znanstvena područja
Tekstilna tehnologija
POVEZANOST RADA
Projekti:
117-0000000-1376 - Napredne tehničke tkanine i procesi (Kovačević, Stana, MZOS ) ( CroRIS)
117-1171879-1899 - Numeričko modeliranje u inženjerskoj analizi tekstila i odjeće (Šomođi, Željko, MZOS ) ( CroRIS)
Ustanove:
Tekstilno-tehnološki fakultet, Zagreb