Naslov
3D Ink Jet Printing

Autori
Lozo, Branka ; Stanić, Maja

Vrsta obrazovnog materijala
Ostalo (nedefinirano)

Izdavač
Society for Imaging Science and Technology

Grad
Springfield (VA)

Godina
2010

Stranica
76

Ključne riječi
Introduction; Basics of 3D printing process; Prints properties; Applications of 3D printing

Sažetak
3D printing is a rapid prototyping technique based on standard ink-jet printing process, with basic materials in form of powder and liquid binders, clear and colored. The virtual CAD model is either created in 3D modeling software or is obtained from the 3D scan of an existing real object. The scan can later be modified. The object is being built from consecutive layers of powder, with binder selectively applied by ink-jet printing, in cross-cuts of the 3D model, and solidified. The printed object is usually post-processed by the selected infiltrant. The method is used in various application areas, from native RP, CAD and concept modeling to architecture, GIS and spatial planning, retail and entertainment, fine arts and preservation of cultural heritage, just to mention some. This overview short course includes an introduction to the basics of 3D ink-jet printing, of both white and colored models, describing all phases in creation of the printed object, with the emphasis on the characterization of materials and prints, specific material effects on the final structure properties, prints mechanical stability, permanence and color stability. The short course also uses the case studies, addressing specific issues of utilization of 3D printing in various areas of application.

Izvorni jezik
Engleski

Znanstvena područja
Grafička tehnologija

POVEZANOST RADA