Naslov
Influence of Mounting Temperature Probes on the Excitation Winding on its Temperature Field

Autori
Hanić, Zlatko ; Kovačić, Marinko ; Vražić, Mario

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
The XIX International Conference on Electrical Machines (ICEM 2010) : proceedings / Parasiliti, Francesco - Rim : B4D, 2010, 1-6

ISBN
978-1-4244-4175-4

Skup
The XIX International Conference on Electrical Machines (19 ; 2010)

Mjesto i datum
Rim, Italija, 06.09.2010. - 08.09.2010

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
temperature probe; excitation winding

Sažetak
Accurate and reliable information about the temperature of the synchronous generator excitation winding hot spot is necessary to determine the dynamic limit caused by excitation winding overheating in the PQ diagram. For good estimation of a position and the hot spot temperature it was decided to mount 19 temperature probes on one pole of the 6- pole, 400 kVA, 50 Hz synchronous generator. Due to a large number of the probes and because the probes should be glued with the metal epoxy it was assumed that mounting of the probes will disrupt the temperature field of the excitation winding. To get the answer to this question the excitation winding resistance was measured before and after mounting the probes, in a hot and a cold state. Temperature rise can be estimated if the resistance ratio in the hot and the cold state is known. The paper also addresses the analysis of the measurement accuracy.

Izvorni jezik
Engleski

Znanstvena područja
Elektrotehnika

POVEZANOST RADA