Naslov
Influence of the activating flux on weld joint properties at arc stud welding process

Autori
Samardžić, Ivan ; Bajić, Darko ; Stoić, Antun ; Klarić, Štefanija

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni

Izvornik
Metalurgija / Alfirević, I ; Samardžić, I ; Dibatkin, S. - Zagreb : Hrvatsko metalurško društvo, 2010, 214-214

Skup
Simpozij Hrvatskog Metalurškog Društva SHMD '2010

Mjesto i datum
Šibenik, Hrvatska, 20.06.2010. - 24.06.2010

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
arc stud welding; activating flux; on-line monitoring; macrosection analysis

Sažetak
In this paper, the influence of the activating flux on the weld joint properties at the drawn arc stud welding process with ceramic ferrule is analysed. In the experimental part of the paper, the arc stud welding process was performed, with the application of the activating flux for ATIG process. In order to evaluate the influence of the activating flux on the welding process parameters variations, the main welding parameters were monitored by an on-line monitoring system. Besides monitoring of welding current and voltage, the influence of the activating flux on the weld joint appearance was investigated. The macrosections of the weld joints welded with the same parameters, but with and without the presence of activating flux are shown.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA