Naslov
Image Analysis in 3D Printing Reproduction

Autori
Stanić, Maja ; Lozo, Branka

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Book of Proceedings / Simončić, Barbara ; Hladnik, Aleš ; Pavko - Čuden, Alenka ; Ahtik, Jure ; Luštek, Barbara ; Demšar, Andrej ; Urbas, Raša - Ljubljana : University og Ljubljana, 2010, 130-137

ISBN
978-961-6045-79-7

Skup
5th International Symposium on Novelties in Graphics

Mjesto i datum
Ljubljana, Slovenija, 27.05.2010. - 29.05.2010

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
3D ink-jet printing; Reproduction; Object orientation; Image analysis; Colour

Sažetak
3D printing is a powder-based rapid prototyping technique, based of conventional ink jet printing. The virtual CAD object is sliced in layers and build by consecutively printing and joining layers of basic materials, the powder and the binders. The prints are usually further post-processed by applying infiltrants (cyanoacrylates, epoxy resins). 3D printing process by ZCorporation, described in this paper, can produce full coloured objects, as it uses both clear and coloured binders. In this work, the image analysis procedures, widely used in printing industry and graphic technology, are being researched as methods for studying the reproduction of surface elements in 3D printing. In order to observe the possible differences in reproduction caused by relative positions of prints surfaces in the build bed, custom-developed test plates were placed in different orientations. The printed test plates respective surfaces were scanned and analyzed with ImageJ, by using built-in and custom developed procedures.

Izvorni jezik
Engleski

Znanstvena područja
Grafička tehnologija

POVEZANOST RADA