Naslov
Analsys of Surface Roughness Factors of Solid Printing Areas on Flexo Printing Plates

Autori
Novaković, Dragoljub ; Dedijer, Sandra ; Gojo, Miroslav ; Mahović Poljaček, Sanja

Izvornik
Machine Design (Novi Sad) (1821-1259) 49 (2010); 319-324

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
Surface roughness; roughness factors; flexo printing plates.

Sažetak
In this paper four different surface roughness parameters of two different flexo printing plates were measured. The main aim of the measurement was to establish the correlation between final developed surface roughness of solid printing areas and different production conditions. This measurement data is very important since it influences the further printing process. In the experiment two different flexo printing plates were used, one digital, with solvent developing process and the other conventional also developed using solvent. The production parameters which were varied were main exposure time and development conditions in order to establish the correlation between ISO surface roughness parameters and production conditions. The measurements were taken using the Portable Surface Roughness Tester TR 200. The result yield different surface roughness values for different plates and different values within plates but with changed processing. Key words: Surface roughness, roughness factors, flexo printing plates.

Izvorni jezik
Engleski

Znanstvena područja
Grafička tehnologija

POVEZANOST RADA