Pregled bibliografske jedinice broj: 453217
Selection of the cutting speed by the broaching of the gas turbine disc
Selection of the cutting speed by the broaching of the gas turbine disc // Zbornik - 4. Međunarodno savjetovanje proizvodnog strojarstva CIM 97 / Cebalo, Roko (ur.).
Zagreb, 1997. str. B.105-B.114 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 453217 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Selection of the cutting speed by the broaching of the gas turbine disc
Autori
Pavić, Ante ; Šutić, Zlatan
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Zbornik - 4. Međunarodno savjetovanje proizvodnog strojarstva CIM 97
/ Cebalo, Roko - Zagreb, 1997, B.105-B.114
Skup
4th International Conference on Production Engeneering CIM 97
Mjesto i datum
Opatija, Hrvatska, 12.06.1997. - 13.06.1997
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
broaching; cutting speed; tool life; tool wear criterion
Sažetak
In this paper the possibility of the increas of cutting speed in broaching of the slots on the gas turbine rotor discs has been investigated. The aim was to increase the productivity and reduce the machining costs. Tool wear at normal production has been observed and the experiments have been carried out at the increased cutting speed. Based on the aforementioned, the tool wear criterion (parameter VB) and the increased cutting speed have been determined.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
Napomena
Pokusi u ovom radu izvršeni su u Tvornici plinskih turbina, Karlovac
