Naslov
Crosslinking of an unsaturated polyester resin in the mould: Modelling and heat transfer studies

Autori
Kosar, Vanja ; Gomzi, Zoran

Izvornik
Applied mathematical modelling (0307-904X) 34 (2010), 6; 1586-1596

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
crosslinking ; polyester resin ; mould ; airflow ; mathematical model

Sažetak
The crosslinking of unsaturated polyester was studied by using an experiment and a mathematical model of the process. Temperature-time profiles were recorded in the centre of the sample inside the mould at the outer wall of the cylindrical copper mould, and in the bulk of the heated air bath. A numerical model was constructed by taking into account the heat transferred by convection from the air to the mould surface and the heat transferred by conduction through the resin, as well as the heat generated by the crosslinking reaction. The convection heat transfer coefficient was determined in independent experiments with the empty copper mould. Introduction of the carbon base filler reduced the amount of heat generated in the composite due to the less reactive component in the composite. As a result, it lowered the temperature of the resin. By recording the temperature-time and the degree of crosslinking-time profiles developed within the sample extensive knowledge of the process can be obtained. The effects of the convection heat transfer on the rate of mould heating, and the conduction heat transfer through the mould as well as the internal heat generated by the crosslinking reaction are visibly shown, despite a complexity of the process.

Izvorni jezik
Engleski

Znanstvena područja
Kemijsko inženjerstvo

POVEZANOST RADA