Pregled bibliografske jedinice broj: 43850
Numerical procedure for obtaining the gears' addendum modification coefficients based on the sliding friction loss minimum
Numerical procedure for obtaining the gears' addendum modification coefficients based on the sliding friction loss minimum // Proceedings ofthe International Congress "Gear Transmissions" / Arnaudov, Kiril (ur.).
Sofija, 1995. str. 97-100 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 43850 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Numerical procedure for obtaining the gears' addendum modification coefficients based on the sliding friction loss minimum
Autori
Križan, Božidar
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings ofthe International Congress "Gear Transmissions"
/ Arnaudov, Kiril - Sofija, 1995, 97-100
Skup
International Congress "Gear Transmissions"
Mjesto i datum
Sofija, Bugarska, 26.09.1995. - 28.09.1995
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
addendum modification coefficient; friction; gear; loss
Sažetak
A geometrical sliding friction loss factor for involute cylindrical gear mesh has been defined. This factor comprises the influence of the magnitude and the shape of the toothing as well as the change of the load during the mesh on the sliding power loss. A computer program has been developed in order to calculate the optimal addendum modification coefficients that give a minimal geometrical sliding friction loss factor i.e. minimal sliding power loss. Theoretical calculations are in good accordance with results obtained by the measurements of friction losses on test rig of power circulating type.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
