Pregled bibliografske jedinice broj: 432401
Shear strength of weathered soft rock – proposal of test method additions
Shear strength of weathered soft rock – proposal of test method additions // Proceedings of the Regional Symposium of the International Society for Rock Mechanics, EUROCK 2009, Rock Engineering in Difficult Ground Conditions - Soft Rocks and Karst / Vrkljan, Ivan (ur.).
London : Delhi: CRC Press ; A.A. Balkema Publishers ; Taylor & Francis, 2009. str. 303-307 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 432401 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Shear strength of weathered soft rock – proposal of test method additions
Autori
Miščević, Predrag ; Vlastelica, Goran
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the Regional Symposium of the International Society for Rock Mechanics, EUROCK 2009, Rock Engineering in Difficult Ground Conditions - Soft Rocks and Karst
/ Vrkljan, Ivan - London : Delhi : CRC Press ; A.A. Balkema Publishers ; Taylor & Francis, 2009, 303-307
ISBN
978-0-415-80481-3
Skup
EUROCK 2009 Rock Engineering in Difficult Ground Conditions - Soft Rocks and Karst
Mjesto i datum
Cavtat, Hrvatska, 28.10.2009. - 31.10.2009
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
marl ; weathering ; shear strength
Sažetak
One of the main soft (weak, clay-bearing) rocks characteristic is relatively rapid deterioration and degradation of strength when soft rock is exposed to atmospheric agents (i.e. weathering). In the investigation of strength degradation caused with weathering, wetting – drying process as a part of weathering, can cause problems even with preparation of samples for testing. In contact with water, moisture of the material is changed and deterioration process is initiated. In order to overcome problem with sample preparation, additions to test procedure are proposed. Additions are tested on marl samples from Eocene flysch formation. Before immersion into the plaster for testing, samples were covered with a thin metal net and subjected to weathering. Purpose of the net is to hold sample as one unit, because during the weathering sample break into smaller peaces. Weathering of samples was simulated with wetting-drying process in laboratory conditions. Acquired results on weathered samples are compared with shear strength of unweathered samples.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo
POVEZANOST RADA
Projekti:
083-0831510-3130 - Modeliranje rastrošbe za potrebe proračuna geotehničkih konstrukcija u flišu (Miščević, Predrag, MZO ) ( CroRIS)
Ustanove:
Fakultet građevinarstva, arhitekture i geodezije, Split
Citiraj ovu publikaciju:
Časopis indeksira:
- Scopus