Naslov
Calibration of Cutting Force Coefficients in Face Milling

Autori
Sekulić, Milenko ; Gostimirović, Marin ; Jurković, Zoran ; Kovač, Pavel

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Development and Modernization of Production / Karabegović, Isak ; Jurković, Milan ; Doleček, Vlatko - Bihać : Faculty of Technical Engineering, 2009, 17-18

ISBN
978-9958-624-29-2

Skup
7th International Scientific Conference - RIM 2009

Mjesto i datum
Kairo, Egipat, 26.09.2009. - 03.10.2009

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
cutting forces; Kienzle equation; face milling

Sažetak
Milling is a commonly used process in manufacturing industry. Reliable prediction of milling forces is significant for the simulation of the machinability, cutter breakage, cutter wear, chatter and surface quality. Therefore, much attentation has been paid to the development of the cutting force model including the calibration of cutting force coefficients.For determination cutting forces are developed many of the matematical models. One of them, called Kienzle equation, is widely used because of simplicity and high accuracy. Conventionally, the cutting force coefficients in Kienzle equation are determined using measured cutting forces in turning. This paper proposes model for calibrating these cutting force coefficients in face milling. Developed model enables high efficiency and accuracy of the obtained results, serial investigations on large number of materials for development of machinability databases and rational usage of laboratory equipment and time and also small expense of the workpiece material and tool inserts.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA