Naslov
Measuring of Deformation in Textile using ARAMIS System

Autori
Hursa, Anica ; Drvar, Nenad ; Šomođi, Željko ; Kodvanj, Janoš ; Rogale, Dubravko

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Proceedings of the 6th International Congress of Croatian Society of Mechanics / Smojver, Ivica ; Sorić, Jurica - Zagreb : Hrvatsko društvo za mehaniku (HDM), 2009, 1-6

ISBN
978-953-7539-11-5

Skup
6th International Congress of Croatian Society of Mechanics

Mjesto i datum
Dubrovnik, Hrvatska, 30.09.2009. - 02.10.2009

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
clothing technology; deformation; textile; measuring system Aramis

Sažetak
In the field of textile and clothing technologies, fabrics, threads, parts and whole clothing are investigated. Because of very complex behaviour of textiles, determination of deformation on fabrics, textiles or part of clothes is necessary for further engineering planning and designing of quality fabrics and clothing. For this purpose, for measuring of surface deformation on fabrics and parts of clothing, optical measuring system ARAMIS is applied. In this paper deformation in vicinity of straight buttonholes which appear during tensile test with constant loading rate are investigated. Based on investigations, the results of deformation which is measured on two crosssections on samples in 4 stages of loading are obtained. It is observed that deformation for buttonhole with radial reinforcement is the smallest and deformations for all investigated reinforcements in second cross-section are lower. With this method exact results of deformation with graphical presentation of distribution are obtained and these prove that the method can be applied in investigation of textiles and clothes.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo, Tekstilna tehnologija

POVEZANOST RADA