Pregled bibliografske jedinice broj: 430210
The sheet metal forming with hydraulic fluid pressure
The sheet metal forming with hydraulic fluid pressure // Icit&MPT 2009 / Gašper Gaotar (ur.).
Celje: TECOS Slovenian Tool and Die Development Centre, 2009. str. 93-96 (poster, međunarodna recenzija, cjeloviti rad (in extenso), ostalo)
CROSBI ID: 430210 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
The sheet metal forming with hydraulic fluid pressure
Autori
Grizelj, Branko ; Josip, Cumin ; Seuček, Ivan ; Šoškić, Nikola
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), ostalo
Izvornik
Icit&MPT 2009
/ Gašper Gaotar - Celje : TECOS Slovenian Tool and Die Development Centre, 2009, 93-96
ISBN
978-961-6692-01-4
Skup
7th international conference on industrial tools and material process technologies
Mjesto i datum
Celje, Slovenija, 04.10.2009. - 07.10.2009
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
hydroforming; fluid pressure; shhet metal; pipe; die
Sažetak
The plastic forming of the sheet metal plates with fluid pressure is the most applied process for the modern production of special elements, and elements of widespread use. Higher relations of a drawing ratio are reached by the application of hydroforming technology. Number of necessary operations, number of tools, and production costs for the mass production of hydroformed parts are lower than compared to conventional metalforming processes. Also the quality of products is considerably better, which means that satisfactory tribological conditions for plastic forming are achieved. Therefore there is a considerable increase of application of this technology at the technologically developed countries.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Projekti:
152-1201787-1478 - CAD/CAM tehnika za modernu izradbu alata za lim od visokočvrstih čelika u 4D (Grizelj, Branko, MZOS ) ( CroRIS)
Ustanove:
Strojarski fakultet, Slavonski Brod
