Pregled bibliografske jedinice broj: 429896
Response of structural steel subjected to uniaxial stress at lowered and elevated temperatures
Response of structural steel subjected to uniaxial stress at lowered and elevated temperatures // Proceedings of the 6th International Congress of Croatian Society of Mechanics / Smojver, Ivica ; Sorić, Jurica (ur.).
Zagreb: Hrvatsko društvo za mehaniku (HDM), 2009. str. CD-ROM (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 429896 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Response of structural steel subjected to uniaxial stress at lowered and elevated temperatures
Autori
Brnić, Josip ; Čanađija, Marko ; Turkalj, Goran ; Lanc, Domagoj ; Vukelić, Goran ; Brčić, Marino
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of the 6th International Congress of Croatian Society of Mechanics
/ Smojver, Ivica ; Sorić, Jurica - Zagreb : Hrvatsko društvo za mehaniku (HDM), 2009, CD-ROM
ISBN
978-953-7539-11-5
Skup
6th International Congress of Croatian Society of Mechanics
Mjesto i datum
Dubrovnik, Hrvatska, 30.09.2009. - 02.10.2009
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
ASTM A709 steel; elevated temperatures; mechanical properties; creep test; creep behavior simulation
Sažetak
Response of structural steel ASTM A709 Gr50 at lowered and elevated temperatures was considered. In that way, mechanical properties, like ultimate tensile strength and 0.2 offset yield strength at some levels for both mentioned temperatures were experimentally obtained and presented as engineering diagrams. Also, curves dependences of ultimate tensile strength and 0.2 offset yield strength versus lowered and elevated temperatures were presented. Short-time creep tests for selected constant stress at selected temperatures were carried out. Experimental tests were performed according to the appropriate standards. Based on rheological model, uniaxial creep respons for selected creep test was modeled using the rheological model. All of experimental investigations were performed using modern computer directed experimental system in Laboratory for Structural Strength Testing of Department of Engineering Mechanics of Faculty of Engineering, Rijeka.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo, Temeljne tehničke znanosti
POVEZANOST RADA
Projekti:
069-0691736-1737 - Numerička analiza odziva konstrukcija za određena područja eksploatacije (Brnić, Josip, MZOS ) ( CroRIS)
Ustanove:
Tehnički fakultet, Rijeka
Profili:
Goran Vukelić
(autor)
Domagoj Lanc
(autor)
Marino Brčić
(autor)
Goran Turkalj
(autor)
Marko Čanađija
(autor)
Josip Brnić
(autor)