Naslov
Active Dispersionless Metamaterials – a Path towards Broadband Cloaking

Autori
Hrabar, Silvio

Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, pp prezentacija, znanstveni

Izvornik
Proceedings on 2009 REME Workshop and 3rd Young Scientist Meeting on Metamterials / Segovia Vargas, Daniel - Madrid : Universidad Carlos III de Madrid, 2009, 108-130

Skup
2009 REME Workshop and 3rd Young Scientist Meeting on Metamterials

Mjesto i datum
Madrid, Španjolska, 06.07.2009. - 08.07.2009

Vrsta sudjelovanja
Pozvano predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
active metamaterial; dispersion; cloaking

Sažetak
The feasibility of practical implementations of electromagnetic cloaking technology (the ‘ invisibility technology’ ) proposed in the recent literature will be analyzed. It will be shown that one of the basic problems present in all current proposals is a narrowband operation caused by basic dispersion constraints of any passive medium. However, the use of active transmission-line-based metamaterials, for which the basic constrains do not apply, may overcome this problem. The basic properties of these active materials (dispersion and stability) were investigated with the help of commercial circuit simulator. Simulation results showed that is possible to achieve either electric or magnetic ‘ plasmonic’ behavior in a wide frequency band (limited by the characteristics of active negative converters). The experimental prototype of basic active ‘ plasmonic’ transmission line operating in 1 GHz RF region, developed at University of Zagreb, will be presented. It will be shown that the measured results indeed reveal almost dispersionless equivalent permittivity within a frequency band of one octave. In the second part of the presentation, the use of prototyped active ‘ plasmonic’ transmission lines for 2 D cloaking will be presented. The 2D model of plasmonic cloak comprising 2D active transmission lines was analyzed using a standard circuit simulator. The plane wave excitation was simulated as an array of voltage sources in the circuit simulator and distribution of the voltages in the nodes of 2D active line (that corresponds to the distribution of the E field) was plotted. The results showed cloaking within a wide frequency band. The practical realization of laboratory prototype of proposed full 2D active cloak is in progress and it will be discussed in the presentation.

Izvorni jezik
Engleski

Znanstvena područja
Elektrotehnika

POVEZANOST RADA