Naslov
STUDY OF INCREMENTAL HOT TUBE BENDING

Autori
Keran, Zdenka ; Novosel, Ivica ; Math, Miljenko

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Annals of DAAAM for 2009 and Proceedings of the 20th International DAAAM Symposium / Katalinić, Branko - Beč : DAAAM International Vienna, 2009, 0093-0093

ISBN
978-3-901509-70-4

Skup
The 20th INTERNATIONAL DAAAM SYMPOSIUM "Intelligent Manufacturing & Automation: Theory, Practice & Education"

Mjesto i datum
Beč, Austrija, 25.11.2009. - 28.11.2009

Vrsta sudjelovanja
Poster

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
flat hot tube bending; incremental hot bending; large diameters and wall thickness

Sažetak
Hot tube bending is used when bending of large diameters, range 150 to 400 mm and wall thickness in range 15 to 25 mm is needed. Processing of prescribed dimensional characteristics requires two possible bending types which are flat pattern tube bending and incremental hot bending. The best process characteristics are obtained with incremental hot bending. This process is still very new and needs further improvement. The article gives detailed description of two types of incremental hot bending. Also, graphic presentation of stresses and strains in a tube wall is given too. This graphical data are reached by numerical simulation using MSC Marc Mentat program package.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA