Naslov
Analysis of incremental hot tube bending

Autori
Keran, Zdenka ; Novosel, Ivica ; Math, Miljenko

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
12th International Scientific Conference on Production Engineering (CIM 2009) : Computer Intergrated Manufacturing and High Speed Machining : proceedings / Abele, Eberhard ; Udiljak, Toma ; Ciglar, Damir - Zagreb : Hrvatska udruga proizvodnog strojarstva (HUPS), 2009, 111-114

ISBN
978-953-7689-00-1

Skup
Međunarodno znanstveno savjetovanje proizvodnog strojarstva (12 ; 2009)

Mjesto i datum
Biograd na Moru, Hrvatska, 17.06.2009. - 20.06.2009

Vrsta sudjelovanja
Ostalo

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
flat hot tube bending; incremental hot bending; large diameters and wall thickness
(flat hot tube bending; incremental hot bending; large diameters and wall thickness.)

Sažetak
Hot tube bending is used when bending of large diameters, range 150 to 400 mm and wall thickness in range 15 to 25 mm is needed. Processing of prescribed dimensional characteristics requires two possible bending types which are flat hot tube bending and incremental hot bending. The best process characteristics are obtained with incremental hot bending. This process is still very new and needs further improvement. The article gives detailed description of two types of incremental hot bending. Also, graphic presentation of stresses and strains in a tube wall is given too. This graphical data are reached by numerical simulation using MSC Marc Mentat program package.

Izvorni jezik
Engleski

Znanstvena područja
Strojarstvo

POVEZANOST RADA