Pregled bibliografske jedinice broj: 42190
Checking the accuracy of working systems
Checking the accuracy of working systems // Proceedings of the 11th International DAAAM Symposium / Katalinić, Branko (ur.).
Beč: DAAAM International Vienna, 2000. str. 197-198 (predavanje, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 42190 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Checking the accuracy of working systems
Autori
Ivančić, Ivan ; Mihoci, Kristijan
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
Proceedings of the 11th International DAAAM Symposium
/ Katalinić, Branko - Beč : DAAAM International Vienna, 2000, 197-198
Skup
Proceedings of the 11th International DAAAM Symposium
Mjesto i datum
Opatija, Hrvatska, 19.10.2000. - 21.10.2000
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
testing; monitoring; maintenance
Sažetak
Deviations from a given relative motion between tool and workpiece are consequence of: failures generated in manufacturing phase or during assembly; elastic deformations caused by static, dynamic and/or thermal stresses; failures in control circuits.
Check can be done by means of test devices that can be quickly and easily set on a machine, and processing of the given information can be performed on personal computers. One such test was made by means of Quick Check Ballbar System equipment of the Renishaw company on the three-axis machining centre. Testing is very short, and information about current condition of the machine is sufficient for analysis.
Monitoring of working system condition, i.e. monitoring of changes in deviations could be done by laser interferometer. Besides, by applying elements of adaptive control, laser interferometer could be used for automatic (program) correction of geometrical deviations.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
