Pregled bibliografske jedinice broj: 403281
Testing of Ceramic Cutting Tools with an Interrupted Cut Simulator
Testing of Ceramic Cutting Tools with an Interrupted Cut Simulator // Engineering Review, 28 (2008), 1; 11-16 (podatak o recenziji nije dostupan, izvorni znanstveni rad, znanstveni)
CROSBI ID: 403281 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Testing of Ceramic Cutting Tools with an Interrupted Cut Simulator
Autori
Cep, Robert ; Barišić, Branimir
Izvornik
Engineering Review (1330-9587) 28
(2008), 1;
11-16
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, izvorni znanstveni rad, znanstveni
Ključne riječi
Ceramic Cutting Tool; Interrupted Cutting; Cutting Tool Tests; Machining
Sažetak
Ceramic cutting tools availability at interrupted machining was solution at this article. Experiments were provided at special fixture – interrupted cut simulator. This fixture was constructed at our Department of Machining and Assembly in terms of project Czech Science Foundation. The goals of tests were contribute to bigger using of these cutting materials at machining, especially at interrupted machining. Producers of ceramic cutting tools made during centuries big step ahead. Namely increasing tenacity at conservation of high fortress and hardness is advantage. Some producers of these materials advise cutting inserts for interrupted machining at present time.
Izvorni jezik
Engleski
Znanstvena područja
Računarstvo, Strojarstvo, Temeljne tehničke znanosti
POVEZANOST RADA
Projekti:
069-1201787-1754 - Numeričko modeliranje, simulacija i optimizacija u oblikovanju lima (Car, Zlatan, MZOS ) ( CroRIS)
Ustanove:
Tehnički fakultet, Rijeka
Profili:
Branimir Barišić
(autor)
Citiraj ovu publikaciju:
Časopis indeksira:
- Web of Science Core Collection (WoSCC)
- Emerging Sources Citation Index (ESCI)
Uključenost u ostale bibliografske baze podataka::
- Cambridge Scientific Abstracts, VINITI
