Pregled bibliografske jedinice broj: 40201
Consumption of Energy at Cold Working of Pipes
Consumption of Energy at Cold Working of Pipes // Proceedings of 2nd International Scientific Conference " Effective Production, Transmission and Consumption of Energy " and 7th International Scientific Conference " Energy Transformations in Industry " published in Acta Mechanica Slovaca 3(2000) / Imriš, Ivan (ur.).
Košice: Technical University of Košice, 2000. str. 495-498 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 40201 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Consumption of Energy at Cold Working of Pipes
Autori
Gojić, Mirko ; Belošević, Zvonimir ; Črnko, Josip
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proceedings of 2nd International Scientific Conference " Effective Production, Transmission and Consumption of Energy " and 7th International Scientific Conference " Energy Transformations in Industry " published in Acta Mechanica Slovaca 3(2000)
/ Imriš, Ivan - Košice : Technical University of Košice, 2000, 495-498
Skup
2nd International Scientific Conference "Effective Production, Transmission and Consumption of Energy" and 7th International Scientific Conference "Energy Transformations in Industry"
Mjesto i datum
Herľany, Slovačka, 02.10.2000. - 05.10.2000
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
cold working ; energy ; exhaust gas ; heat treatment ; pipe
Sažetak
Energy presents an important expense at production of the cold worked pipes. A continuous observation of consumption of each energy medium is needed. As a result of the technological and organization measures undertaken are the expenses for energy that are for above 400000 DM lower in the last year than those in the year 1998. The results of emission measurement from the chimney of the furnace for heat treatment of pipes showed that the degree of air pollution is very low. Also it was found that frequency measurements of emitted particles in the exhaust gases were not needed.
Izvorni jezik
Engleski
Znanstvena područja
Metalurgija