Pregled bibliografske jedinice broj: 40126
Deep Drawing Stress Modelling With Wall Thickness Reduction
Deep Drawing Stress Modelling With Wall Thickness Reduction // CIM '99 - Computer Integrated Manufacturing and High Speed Machining / Cebalo, Roko ; Schulz, Herbert (ur.).
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS), 1999. str. IV109-IV119 (poster, nije recenziran, sažetak, znanstveni)
CROSBI ID: 40126 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Deep Drawing Stress Modelling With Wall Thickness Reduction
Autori
Jurković, Milan ; Hriešik, Andrej ; Barišić, Branimir
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
CIM '99 - Computer Integrated Manufacturing and High Speed Machining
/ Cebalo, Roko ; Schulz, Herbert - Zagreb : Hrvatska udruga proizvodnog strojarstva (HUPS), 1999, IV109-IV119
Skup
5th International Scientific Conference on Production Engineering
Mjesto i datum
Opatija, Hrvatska, 17.06.1999. - 18.06.1999
Vrsta sudjelovanja
Poster
Vrsta recenzije
Nije recenziran
Ključne riječi
Deep Drawing Process; Modelling; Thicknes Reduction; Drawing Force; Upper Bound Method
Sažetak
Drawing stress modelling, respectively deformation force of deep drawingprocess with wall thickness reduction has been performed by using the upper bound method. Basic parameters of modelling are: technological (deformation degree), design (tool working zone geometry), kinematic (plastic flow angle) and tribological (contact friction). The purpose of stress modelling and drawing force is minimization of tool loading with the aim of increasing tool life and productivity of the machining system. By applying macro optimization of deep drawing process tool life may be increased more than 50%, which is the main aim of this paper.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
