Pregled bibliografske jedinice broj: 394995
RIM STRESS DISTRIBUTION OF THIN-RIMMED GEAR
RIM STRESS DISTRIBUTION OF THIN-RIMMED GEAR // University review (Trenčín), 2 (2008), 3; 77-81 (podatak o recenziji nije dostupan, članak, znanstveni)
CROSBI ID: 394995 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
RIM STRESS DISTRIBUTION OF THIN-RIMMED GEAR
Autori
Marunić, Gordana
Izvornik
University review (Trenčín) (1337-6047) 2
(2008), 3;
77-81
Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni
Ključne riječi
Spur Thin-Rimmed Gear; FEM; Rim Stress; Web Thickness
Sažetak
The paper deals with the effects of rim and web thickness on the rim stress of external spur thin-rimmed gear with middle web arrangement. Based on the FEM calculations, the area of maximum rim stress detected in axial direction i.e. at the joint of rim and web, is established in radial direction. The obtained insight into variation of location and magnitude of maximum rim stress in relation to a gear geometrical parameters that contribute to possible gear weight reduction, can be the basis for some additional design directions of gears with complex body.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Projekti:
069-0692195-1793 - Konstrukcija i optimizacija prijenosnika snage (Obsieger, Boris, MZOS ) ( CroRIS)
Ustanove:
Tehnički fakultet, Rijeka
Profili:
Gordana Marunić
(autor)
