Pregled bibliografske jedinice broj: 390505
Properties of protective coating applied on concrete bridge
Properties of protective coating applied on concrete bridge // Proccedings of the International Conference on Bridges / Radić, Jure (ur.).
Zagreb: SECON HDGK, 2006. str. 1171-1178 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 390505 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Properties of protective coating applied on concrete bridge
Autori
Würth, Donka ; Sekulić, Dalibor ; Štemberga, Karla
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
Proccedings of the International Conference on Bridges
/ Radić, Jure - Zagreb : SECON HDGK, 2006, 1171-1178
ISBN
953-95428-0-4
Skup
International Conference on Bridges
Mjesto i datum
Dubrovnik, Hrvatska, 21.05.2006. - 24.05.2006
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
protective coating ; durability ; HPFRC ; shrinkage of concrete
Sažetak
Specific requirements for the repair of construction materials in maritime environment consist of using new materials and technologies. Interesting material for this purpose is fibre reinforced concrete (FRC). Depending on repair requirements different types of FRC are in use. FRC with small percentage of steel fibres has a purpose to decrease shrinkage induced cracking and higher amounts of fibres provide better mechanical properties. Interesting type of FRC is High performance steel fibre reinforced concrete (HPFRC), which is characterized with high strength and modulus of elasticity and low shrinkage as important properties for comparison between the old and new concrete and for load bearing capacity. Other HPFRC properties include low permeability, which is important for durability of constructions in maritime environment. In laboratory, two different mixes are produced. HPFRC was mixed with an addition of new generation of superplastificizer, silica fume and steel fibres. In order to prove the required properties of concrete, laboratory tests are carried out. Efficiency of protective coating can be controlled in-situ with classical methods of concrete powder drilling and chemical analysis and with fibre optical deformation sensors which is embedded in the construction during repair works.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo
POVEZANOST RADA
Ustanove:
Građevinski fakultet, Zagreb,
INSTITUT IGH, d.d.