Pregled bibliografske jedinice broj: 38916
Stress Concentration in Spur Tooth Fillet; Conventional and Numerical Approach
Stress Concentration in Spur Tooth Fillet; Conventional and Numerical Approach // PROCEEDINGS, International Conference on Applied Mechanics, SACAM 2000 / Adali, S. ; Morozov, E.V. ; Verijenko, V.E. (ur.).
Durban: School of Mechanical Engineering, University of Natal, 2000. str. 521-526 (predavanje, međunarodna recenzija, cjeloviti rad (in extenso), znanstveni)
CROSBI ID: 38916 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Stress Concentration in Spur Tooth Fillet; Conventional and Numerical Approach
Autori
Marunić, Gordana
Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni
Izvornik
PROCEEDINGS, International Conference on Applied Mechanics, SACAM 2000
/ Adali, S. ; Morozov, E.V. ; Verijenko, V.E. - Durban : School of Mechanical Engineering, University of Natal, 2000, 521-526
Skup
International Conference on Applied Mechanics, SACAM 2000
Mjesto i datum
Durban, Južnoafrička Republika, 11.01.2000. - 13.01.2000
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
FEM; Spur Gear; Stress Concentration; Tooth Fillet
Sažetak
On the basis of the stress state at spur gear tooth fillet determined by use of 3D Finite Element Method, the stress concentration (correction) factors have been calculated from the standpoint of the standards DIN 3990/ISO 6336. The parameters of the gear such as the tooth facewidth, the rim thickness, the number of the teeth and addendum modification factor, have been varied, and the differences among the stress concentration factors that occur when 2 and 3D numerical approach is compared with conventional one proposed by the standards, have been analysed. Existing deviations strongly depend upon the examined gear parameters and can be taken into consideration for further improvement of the standards.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
