Naslov
Computer-Aided Garment Construction Based On 3d Body Models Of Different Anthropometric Properties

Autori
Petrak, Slavenka ; Rogale, Dubravko ; Irena Šabarić

Vrsta, podvrsta i kategorija rada
Radovi u zbornicima skupova, cjeloviti rad (in extenso), znanstveni

Izvornik
Book of Proceedings of the 4th International Textile, Clothing & Design Conference 2008 - Magic World of Textiles / Dragčević, Zvonko - Zagreb : Tekstilno-tehnološki fakultet Sveučilišta u Zagrebu, 2008, 641-646

ISBN
978-953-7105-26-6

Skup
4th International Textile, Clothing & Design Conference 2008 - Magic World of Textiles

Mjesto i datum
Dubrovnik, Hrvatska, 05.10.2008. - 08.10.2008

Vrsta sudjelovanja
Predavanje

Vrsta recenzije
Međunarodna recenzija

Ključne riječi
computer-aided garment construction; 3D body types

Sažetak
The paper describes a computer-aided construction of garment basic cut for defined types of the female body. An analysis of the variations of the construction cut for an individual body type from the basic cut made according to rules of conventional construction was performed. Initially, a 3D scanner was used to record a selected pattern of the female population of various figures and statures or body types. A comprehensive analysis of computer-aided body models was made, and characteristic body measurements needed for computer-aided garment construction were found. An investigation of the proportionality of individual body parts and variations from normal proportions was conducted. By intersecting the model by means of planes curves of characteristic body cross sections were found that additionally indicate the need for the customization of an individual cutting part. The definition of construction properties, which are relevant for garment fit and body-dependent, create prerequisites for determining characteristic measuring points and lines on 3D body model in which an customization of the cut for the selected body type is made. Based on all relevant parameters found a computer-aided construction of basic cuts of the selected garment was made to define types of female body. In this way prerequisites for the construction and modeling of a garment collection adapted to a certain body type were created. Computer graphic stations for the construction preparation of the clothing industry were used and high quality and fit of the cut were achieved.

Izvorni jezik
Engleski

Znanstvena područja
Tekstilna tehnologija

POVEZANOST RADA