Pregled bibliografske jedinice broj: 386417
On the occurrence of vibro-impact-regimes in the dynamical system with clearances
On the occurrence of vibro-impact-regimes in the dynamical system with clearances // African Conference on Computational Mechanics / Makan Arnaud G, Nithi Arasu Perumal, Oxtoby O. (ur.).
Pretoria: Council for Scientific and Industrial Research, 2009. str. 108-108 (predavanje, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 386417 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
On the occurrence of vibro-impact-regimes in the dynamical system with clearances
Autori
Kranjčević, Nenad ; Stegić, Milenko ; Vranković, Nikola
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
African Conference on Computational Mechanics
/ Makan Arnaud G, Nithi Arasu Perumal, Oxtoby O. - Pretoria : Council for Scientific and Industrial Research, 2009, 108-108
Skup
First African Conference on Computational Mechanics
Mjesto i datum
Sun City, Južnoafrička Republika, 07.01.2009. - 11.01.2009
Vrsta sudjelovanja
Predavanje
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
Nonlinear Vibrations; Clearances; Vibro-Impact Regimes
Sažetak
Vibration of mechanical systems with clearances can result in relative motion across the clearance space and impacting between the components. Repeated impacts (vibro-impacts) may lead to excessive noise and large changes in the dynamic stiffness. An analysis of such systems is a complex problem which includes an abrupt variation of stiffness, usually modelled as piecewise linear. Vibro-impacts can be separated into three different regimes: a no-impact regime, a single-sided impact and a two-sided impact. A no-impact case occurs whenever the displacement is entirely inside one of the stage stiffness regions. A single-sided impact or a two-sided impact will occur when the displacement exceeds the stiffness breakpoint at one or both sides, respectively [1]. A two-degree-of-freedom system with clearances can be viewed as two coupled nonlinear oscillators. Each oscillator may undergo any of the impact regimes, so the system may be experienced to a total of 3 x 3 = 9 different impact regimes. The objective of this paper is to find the frequency range whether a given impact regime, in the two-degree-of-freedom system with two clearances, exists and to investigate the motivation of impact regime changes. The harmonic balance method and the time finite element method [2] are used for obtaining approximate analytical and numerical frequency responses. The stability of numerical solutions is examined using Poincare` map [3]. Considering the obtained responses, the amplitude ranges of different impact regimes can be determined, as well as, the frequencies at which the transition between impact regimes will occur. Close agreement is found between the solutions resulting from both approaches.
Izvorni jezik
Engleski
Znanstvena područja
Strojarstvo
POVEZANOST RADA
Projekti:
120-1201773-1770 - Modeliranje vibracijskih sustava u strojarstvu (Stegić, Milenko, MZOS ) ( CroRIS)
Ustanove:
Fakultet strojarstva i brodogradnje, Zagreb