Naslov
The Influence of Hardening Related Deformations on Selection of Abrasion Inhibition Process

Autori
Marušić, Vlatko ; Šarčević, Željko ; Rozing, Goran

Izvornik
Strojniški vestnik (0039-2480) 55 (2009), 2; 114-118

Vrsta, podvrsta i kategorija rada
Radovi u časopisima, članak, znanstveni

Ključne riječi
macro deformation ; wear ; protective layer ; carbonized ; surface protective layer quenching ; hard facing welded ; thermal flame spraying

Sažetak
Wear mass loss on samples was compared at depth of hardened layers of induction quenched C 60, carburized 16MnCr5, hard faced with C-Cr-Mn and C-Cr-W-Co electrode deposited layers as well as thermal flame sprayed deposits of C-Cr-Mo layer. Measurements of surface hardness, changes of sample surface hardness towards the core and metallographic examination of the structure were carried out using SMT 1-2070 wear and tear testing device, consisting of a disc and a bracket, in a chamber filled with oil containing SiO2. Wear mass loss on samples in the shape of disc in depth of the hardened layer was measured. Counter body in the form of pedal was made out of material GG 20. It was established that wear mass loss changed the least with the hard faced C-Cr-W-Co layer, after that with thermal flame sprayed deposits and hard faced C-Cr-Mn layers. Then some surface hardened and at last cemented layers, which displayed greatest wear mass loss. Correspondingly, conclusion was drawn that there was need for additional caution when selecting an adequate wear protection process for those machine parts that, due to macro deformation, require surface abrasion as final machining operation.

Izvorni jezik
Slv

Znanstvena područja
Strojarstvo

Napomena
Koautori su u okviru istraživanja pri izradi magistarskog rada (Željko Šarčević), odnosno na doktorskom studiju (Goran Rozing) dali značajan doprinos obrađivanoj temi.

POVEZANOST RADA