Pregled bibliografske jedinice broj: 384506
Strength of the End-notched Glue-laminated Low Curved Beam
Strength of the End-notched Glue-laminated Low Curved Beam // 10th World Conference on Timber Engineering wcte 2008 / Ando, Naoto ; Higashikokubaru, Hideo ; Aasheim, Erik (ur.).
Miyazaki, 2008. str. 369-369 (poster, međunarodna recenzija, sažetak, znanstveni)
CROSBI ID: 384506 Za ispravke kontaktirajte CROSBI podršku putem web obrasca
Naslov
Strength of the End-notched Glue-laminated Low Curved Beam
Autori
Takač, Stjepan ; Matošević, Đurđica ; Jurić, Aleksandar
Vrsta, podvrsta i kategorija rada
Sažeci sa skupova, sažetak, znanstveni
Izvornik
10th World Conference on Timber Engineering wcte 2008
/ Ando, Naoto ; Higashikokubaru, Hideo ; Aasheim, Erik - Miyazaki, 2008, 369-369
Skup
10th World Conference on Timber Engineering wcte 2008
Mjesto i datum
Miyazaki, Japan, 02.06.2008. - 05.06.2008
Vrsta sudjelovanja
Poster
Vrsta recenzije
Međunarodna recenzija
Ključne riječi
end-noched; low curved beam; glulam timber
Sažetak
This paper deals with the bearing behavior of the end-notched, glulam low curved beam. In particular, the bearing capacity of the notch was analyzed regarding the occurrence of tension stresses perpendicular to grain at the notch corner which might endanger the resistance of the beam. The possibilities are revealed for determining the occurrence of transverse tension at the notch and the range of shear stresses. Fine net of finite elements is recommended in the area of the beam notch close to the support. There is a good correspondence between the calculation of the transversal tensile force according to the equation by means of method adopted by Euronorm with those obtained by a computer processing.
Izvorni jezik
Engleski
Znanstvena područja
Građevinarstvo
